PE Tubing
Quantity
-Poly tubing is manufactured from F.D.A. approved resins. It has very low moisture adsorption. It is fungus resistant, non-corrosive,and highly resistant to stress crack. It is suitable for air and water application and us used for beverage and soda transfer.It is available in 2 types, low and high density. Low density provides flexibility and high density, while not as flexible, has a higher temperature and pressure rating. All sizes of low and high density are stocked in natural colors.
Note :The working pressured listed for the nylon tubing is rated at +70°F. Any ambient or internal increase in temperature will lower the above listed working pressures.These tubing are not recommended for milk contact.
Color : Black, Blue, White
Application :
∙ Piping in pneumatic
∙ Central lubrication systems
∙ Air conditioners
∙ Painting machines
∙ Piping in ship (air pressure control, oil or water gauge piping)
∙ Air Piping in automatic control panels
∙ Automobiles (Car air conditioner grease piping)
∙ Agricultural chemical spray machines
∙ Chemical plant (automatic control, instrumentation signal.)
| Stock Code | Sizes | Std Lgth(M) | ID(mm) | OD(mm) | W/P (psi) | ||||||||||||||||||||
| PE-4 | 4MM | 100 | 2 | 4 | 130 | ||||||||||||||||||||
| PE-6 | 6MM | 100 | 4 | 6 | 140 | ||||||||||||||||||||
| PE-8 | 8MM | 100 | 6 | 8 | 155 | ||||||||||||||||||||
| PE-10 | 10MM | 100 | 7.5 | 10 | 135 | ||||||||||||||||||||
| PE-12 | 12MM | 100 | 9 | 12 | 100 | ||||||||||||||||||||
| PE-1/8 | 1/8″ | 100 | 0.093 | 1/8″ | 130 | ||||||||||||||||||||
| PE-1/4 | 1/4″ | 100 | 0.179 | 1/4″ | 140 | ||||||||||||||||||||
| PE-5/16 | 5/16″ | 100 | 0.236 | 5/16″ | 155 | ||||||||||||||||||||
| PE-3/8 | 3/8″ | 100 | 0.275 | 3/8″ | 135 | ||||||||||||||||||||
| PE-1/2 | 1/2″ | 100 | 0.380 | 1/2″ | 130 | ||||||||||||||||||||
